Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Use
It is recommended to clean the filter
once every two weeks and replace
C
it once every six months (the clea-
ning and replacement cycle can be
adjusted according to the use envi-
ronment).
3.2 Control and display panel
Button
Function description
Startup/Standby
Touch this button to switch the wind mode
among normal, baby sleep and AI smart.
(When the filter replacement reminder light
is on, press and hold this button to turn off
the reminder light)
Touch this button to start/stop the swing.
Touch this button to switch the wind speed
(cycles among level 1-2-3-...-10-1-2).
Schedule to shut down in the power-
on state, and schedule to start up in the
standby state; Touch this button to set
the timer (the display cycles among 0-1-
2-...-12-0h); 0h means that the timer is
canceled.
Filter replacement reminder icon; when
the icon
be replaced;
12 / EN
stays on, the filter needs to
In AI smart wind mode, the indicator light
is on, and the wind power is automa-
tically adjusted according to changes in
ambient temperature.
This indicator light is on in sleep wind
mode. Start the sleep wind function, and
the fan automatically adjusts the level ac-
cording to the program; there are three le-
vels: 1, 2 and 3; you can adjust the level of
the sleep wind by pressing the wind speed
button.
Displays the wind speed level or set timer,
and displays the temperature in the wind
mode.
This indicator light is on baby wind mode.
(When the filter replacement reminder light
is on, press and hold this button to turn
off the reminder light) Touch this button
to switch the wind mode among normal,
baby sleep and AI smart. Start the baby
wind function, and the fan automaticall a
djusts the level according to the program;
there are two levels: 1, 2 ; you can adjust
the level of the baby wind by pressing the
wind speed button.
3.3 Additional Features
• Forced shutdown
There is no operation during the running of the
fan, after 15 hours of continuous operation, the
fan will be forced to shut down automatically.
• Intelligent memory
When the fan is turned off or powered off, it will
run in the state before turning off or power off
when the power is powered on again (the timing
function is not memorized).
Bladeless Air Fan & Purifier / User Manual
Werbung
