Standby; Startup And Programme Selection - MAYWAY TOP TECH 3623 Bedienungsanleitung

INSTRUCTION MANUAL FOR DISHWASHERS
Washing stages
During machine operation, the display in area (6) will indicate the various stages of the washing cycle:
Operating temperature reached
Function symbols
Appears when boiler temperature
is shown on the display
Fault: limited operation possible

Turn on the main electrical power switch.

Open the external water tap.

When the machine is in standby, the display is off and the STANDBY (5) LED is red.

Check that the spray arms and filters are positioned correctly.

Check that an overflow is present (if required).

Check the levels of detergent and rinse aid in the dispensers.

Press the ON/OFF button (1) to start the machine, the STANDBY LED (5) will turn green.

During the filling stage, the display will be coloured yellow

Once the optimal conditions are reached, the DISPLAY will turn green to indicate that the machine
is ready.

A symbol on the display indicates the selected programme.

Using the PROGRAMME SELECTION button (3) you can choose between the following cycles:
Dishwashers
DRAIN
Filling
Heating
Operating level reached
Automatic start enabled
Glasswashers
ProSpeed
Short wash programme for lightly soiled dishes.
ProFessional
Medium wash programme for averagely soiled dishes.
ProTemp
Long wash programme for heavily soiled dishes.
ProDrain
Drain cycle.
ProClean
Drain and self-cleaning cycle to be used at the end of working
day.
Appears when the tub temperature
is shown on the display
Regeneration system on
Fault: operation not possible

4.3 Startup and programme selection

UK
Washing
Rinsing
Draining

4.2 Standby

Page 7 of 14