Safire Just GRILLiant Bedienungsanleitung Seite 8

Figure 3
REPLACING THE GAS BURNER HEAD
1. Take the Gas top plate and burner head with the V shaped slot pointing towards the Gas
control knob, looking through the rectangular viewing window on the top plate, guide the
Venturi tube over the Gas valve. IMPORTANT be sure the venturi tube is correctly in place
over the gas Valve before lowering the top plate over the three threaded pins
2. Once the gas top plate is in position hand tighten the three dome nuts
DANGER
1. If you smell gas
a) Close all gas valves
b) Extinguish any open flames
c) If the smell persists contact your LP Gas Supplier or the retailer from whom you purchased the SAfire
Gas Roaster
Gas booklet resized.indd 8 2016/04/19 6:52 PM