Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TECHNICAL DETAILS
Electrical Rating
Blade Speed
Blade Diameter
Maximum Limb Capacity
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey
all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided, will result in death or erious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INSTRUCTIONS
When using electric gardening appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and personal injury.
READ ALL INSTRUCTIONS
Power Cord Safety
Always use the correct supply voltage. The power supply voltage must match the
information quoted on the tool identification plate.
1. We recommend that you always use the appliance supplied via a Residual Current Device
(RCD) with a tripping current of not more than 30mA.
2. Use only extension cables suitable for outdoor use, preferably with a high visibility cord
colour.
With the following specification:
1) For extension cables up to 25 meters, use a wire cross-section of 1.5mm²
2) For extension cables over 25 meters and less than 40 meters, use a wire cross-section of
2.5mm²
3) Always completely unwind cable reels.
3. Extension Cord - Make sure your extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry the current your product will draw.
An undersized extension cord will cause a drop in line voltage resulting in loss of power and
overheating.
230-240VAC / 50Hz / 2400W
4,500 RPM
7"
39mm Diameter
E1
Werbung
