yeep.me eSIXTEEN Originalhandbuch Seite 19

• Tyre wear. Tyre pressure if the unit is equipped with air wheels, and inflate as soon
EN
as is necessary using a bicycle pump or similar.
• The brakes, drum linings, brake pads, foot brake, depending on the unit. If the unit is
equipped with mechanical brakes (disc, drum, foot), ensure they are not rubbing due
to cable tension or exhibiting any other problems, as this may cause the unit to slow
down and prevent it from operating normally. Overheating may impact the brake's
efficiency.
• Check that the electric brake is functioning properly if the unit is equipped with one.
If after adjusting you notice looseness that may affect your ability to drive safely, or
if an unusual noise appears, or a lack of fluidity is apparent, stop using the unit and
contact your dealer for more information or care. If the product, a component, or the
battery are worn out, please contact an authorised service centre to repair or recycle
your product.
PERIOD MAINTENANCE AND CHECKS:
CHARGER
Ensure that the charger cord is not damaged and that the wires are not exposed to
avoid short circuits. The input and output sockets must not be damaged or deformed.
When using the battery charger, it is important to follow the instructions on the label.
WARNING: Only use the charger supplied with the product.
BRAKES
Before each use, check that the brakes are in perfect working order. Check the brakes
regularly to prevent accidents due to brake malfunction.
The brake lever (depending on the model) must not come into contact with the
handlebars and the cables must not be bent at a sharp angle so that the cables
slide with minimum friction. Damaged, frayed or rusty cables must be replaced
immediately.
CAUTION: The surface of the brakes can become extremely hot during
and after operation. You may suffer burns if you come into contact with these hot
surfaces.
CAUTION: In rainy or wet weather, braking distances are extended.
VIBRATIONS
When using an electric balance bike, vibrations can occur due to a variety of factors
such as the quality of the road surface, the condition of the tires, the speed of the
balance bike, and the quality of the suspension. Uneven or rough roads, poorly inflated
or damaged tires, high speeds, and poor suspension can all contribute to vibration on
the unit.
19