Werbung
Verfügbare Sprachen
Verfügbare Sprachen
System connections
Turntable
TAPE REC or
ADAPTOR OUT
(PRE OUT)
TAPE PLAY or
ADAPTOR IN
(MAIN IN)
Speaker system
i |
hal
GE-770/GE-770B (Graphic equalizer)
LINE IN/REC
UNSWITCHED
200 W
LINE OUT/
PLAY
@
To AC outlet
LINE IN/REC
LINE OUT/PLAY
Tape deck A
Fig. 2
Amplifier
Connect
to the tape jacks
(TAPE)
or adaptor jacks
(ADAPTOR)
of your amplifier.
To use the tape jacks, connect between the line input
jacks (LINE IN) of the graphic equalizer and the tape
record jacks (TAPE REC) of your amplifier. Connect be-
tween the line output jacks (LINE OUT) and the tape
playback jacks (TAPE PLAY) of your amplifier.
To use the adaptor jacks, connect between the line in-
put jacks (LINE IN) of the graphic equalizer and the
adaptor output jacks (ADAPTOR
OUT or PRE OUT) of
your amplifier with shielded audio cords. Take care not
to mistake the left
and right [R] channels. Connect
between
the line output jacks (LINE
OUT)
and the
amplifier jacks (ADAPTOR
IN or MAIN IN) in the same
way.
4 GE-770/GE-7708 (kK)
Tape deck B
Tape decks
Two tape decks can be connected to the TAPE A and
TAPE B jacks to permit simultaneous recording or tape
dubbing.
Connect between the tape record jacks (REC) and the
record/input jacks (LINE IN/REC) of your tape deck with
shielded audio cords. Take care not to mistake the left
and right [R] channels.
Connect between the tape playback jacks (PLAY) and
the playback/output jacks (LINE OUT/PLAY)
of your
tape deck in the same way.
AC outlet (Max. 200 W)
Connect the power cord of the tape deck, etc. to this
outlet. The output at this outlet is not controlled by the
power switch of the equalizer.
Notes on connection
Always insert the pin plugs securely. Poor connection
will result in no sound or noise.
Werbung
