Using The Shaver - Philips S7920 Anleitung

Note: Make sure your smartphone is equipped with
Bluetooth 4.0 or higher.
Travel lock
You can lock the appliance when you are going to
travel. The travel lock prevents the appliance from
being switched on by accident. The travel lock also
deactivates Bluetooth.
Activating the travel lock
1 Press the on/off button for 3 seconds to enter
the travel lock mode (Fig. 11).
While you activate the travel lock, the travel
lock symbol flashes (Fig. 12). When the travel
lock is activated, the travel lock symbol lights up
continuously.
When travel lock is activated, Bluetooth is
deactivated.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The travel lock symbol flashes and then goes out.
The shaver is now ready for use and Bluetooth is
activated again.
Charging
-
Charging takes approx. 1 hour.
Charge the shaver before you use it for the first
time and when the display indicates that the
battery is almost empty.
Charging with the supply unit
1 Make sure the appliance is switched off.
2 Insert the small plug into the shaver and put the
supply unit in the wall socket (Fig. 13).
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
shaver.
Preparing for use
Pair the shaver and smartphone
Note: The app is available for iPhone 4S (or higher)
equipped with iOS8 or higher.
For this shaver a special app is available. You
can download the app from the app store. The
app gives you expert advice based on your skin,
beard, shaving method, local weather conditions,
etc to support your daily use. In order to create a
secure and safe connection, first the shaver and
smartphone need to be paired once. The shaver is
equipped with Bluetooth 4.0. Make sure your
smartphone supports this version (or higher) in
order to connect to the shaver.
1 Download the app from the app store.
2 Make sure Bluetooth on the smartphone is
switched on (Fig. 14).
3 Open the app on the smartphone (Fig. 15).
4 Switch on the shaver.
5 In the app a pop up message will appear; press‚
pair'.
6 When paired, the shaver and app will connect
automatically when you open the app and hold
the smartphone and shaver close to each other.
Unpair the shaver and smartphone
Pairing allows a connection between 1 shaver and 1
smartphone. To remove this connection (e.g. when
you have a new smartphone) follow the next steps:
1 Unpair shaver: press and hold the on/off button
on the shaver for approx. 10 seconds to remove
the bond between shaver and app.
Note: The unpairing of the shaver is successful
when the Bluetooth and notification symbol
flash simultaneously (approx. 4 seconds).
2 Unpair smartphone: Choose Settings -> General
-> Bluetooth -> Select the device by pressing (i)
-> and press „forget device".

Using the shaver

Note: This shaver can only be used without cord.
Switching the shaver on and off
1 To switch on the shaver, press the on/off button
once (Fig. 16).
2 To switch off the shaver, press the on/off button
once.
Connect with the shaver
1 Make sure Bluetooth on the smartphone is
switched on.
2 Open the app on the smartphone (Fig. 15).
3 When paired, the shaver and the app will
connect automatically. You can now start
shaving.
Note: Make sure you have a good Bluetooth
and Internet connection to fully benefit from
the app.
4 Synchronize your shaves (see ‚Synchronise
your shaves') and set your Sensitive Shave
settings.
5 Keep the smartphone and shaver close to each
other in order to stay connected.
Caution: Do not use the smartphone in moist
surroundings. Moist/water can damage the
smartphone.
Synchronise your shaves
In order to obtain maximum benefit of the shaver
and the app, you have to synchronise your shaves
regularly. The shaver can store up to 20 shaves,
so make sure you synchronise the shaver at least
once every 3 weeks.
1 Open the app and make sure you are close to
the shaver.
2 The app will connect automatically and
synchronises your last shaves (Fig. 17).
Shaving
Note: This shaver can only be used without cord.
Skin adaptation period
Your first shaves may not bring you the result you
expect and your skin may even become slightly
irritated. This is normal. Your skin and beard need
time to adapt to any new shaving system.
We advise you to follow the advice provided by
the app and shave regularly (at least 3 times a
week) with this shaver for a period of 4 weeks to
allow your skin to adapt to the new shaver.
Dry shaving
1 Switch on the appliance.
2 Move the shaving heads over your skin in
circualr movements (Fig. 18)
Note: Circular movements provide better
shaving results than straight movements.
3 Clean the appliance after use.
Wet shaving
You can also use this shaver in the shower or on a
wet face with shaving foam or shaving gel.
To shave with shaving foam or shaving gel, follow
the steps below:
1 Apply some water to your skin.
2 Apply shaving foam or shaving gel to your skin
(Fig. 19).
3 Rinse the shaving unit under the tap to ensure
that the shaving unit glides smoothly over your
skin (Fig. 20).
4 Switch on the shaver.
5 Move the shaving heads over your skin in
circular movements (Fig. 18).
Note: Rinse the shaving unit regularly to ensure
that it continues to glide smoothly over your skin.
6 Dry your face and thoroughly clean the shaver
after use (see ‚Cleaning and maintenance').
Note: Make sure you rinse all foam or shaving
gel off the appliance.
Using the click-on attachments
Removing or attaching the click-on
attachments
1 Make sure that the shaver is switched off.
2 Pull the attachment straight off the handle (Fig. 21).
Note: Do not twist the attachment while you
pull it off the handle.
3 Insert the lug of the attachment into the slot
in the top of the handle (Fig. 22). Then press
down the attachment to attach it to the handle
('click').
Using the beard styler attachment with
comb
You can use the beard styler attachment with the
comb attached to style your beard at one fixed
setting, but also at different length settings. You
can also use it to pre-trim any long hairs before
shaving for a more comfortable shave.
The hair length settings on the beard styler
attachment correspond to the remaining hair
length after cutting and range from 1 to 5mm.
1 Attach the attachment to the appliance (‚click').
2 Slide the comb straight into the guiding grooves
on both sides of the beard styler attachment
('click') (Fig. 23).
3 Press the length selector and then push it to
the left or right to select the desired hair length
setting (Fig. 24).
4 Switch on the shaver.
5 Move the appliance upwards while you exert
gentle pressure. Make sure the front of the
comb is in full contact with the skin (Fig. 25).
6 Clean the attachment after use (see‚ Cleaning
and maintenance').
Using the beard styler attachment
without comb
You can use the beard styler attachment without
the comb to contour your beard, moustache,
sideburns or neckline to a length of 0.5mm.
1 Pull the comb off the beard styler attachment
(Fig. 26).
Note: Grab the comb in the center to pull it off
the beard styler attachment. Do not pull at the
sides of the comb.
2 Switch on the shaver.
3 Hold the beard styler attachment perpendicular
to the skin and move the appliance downwards
while you exert gentle pressure (Fig. 27).
4 Clean the attachment after use (see‚ Cleaning
and maintenance').
Using the cleansing brush attachment
Use the rotating cleansing brush attachment with
your daily cleansing cream. The cleansing brush
attachment removes oil and dirt, contributing to a
healthy and oil-free skin.
1 Attach the attachment to the appliance (‚click')
(Fig. 28).
2 Moisten the attachment with water.
Do not use the appliance with a dry brush head,
as this can irritate the skin (Fig. 29).
Tip: Use the cleansing brush attachment before
shaving for easier shaving and a more hygienic
shaving result.
3 Moisten your face with water and apply a
cleanser to your face (Fig. 30).
4 Place the attachment on your right cheek.
5 Switch on the shaver.
6 Gently move the brush across your skin from
the nose towards the ear (Fig. 31). Do not push
the attachment to hard onto the skin to make
sure the treatment remains comfortable.
7 After approx. 20 seconds you can move the
appliance to your left cheek and start cleansing
this part of your face
Caution: Do not clean the sensitive area
around your eyes.