Charging The Power Bank - AlzaPower PBS20PDB Bedienungsanleitung

INSTRUCTIONS
Checking the power status of the power bank
It is necessary to check the status of charge of the power bank before charging a device. Briefly
press the power button and it will light up depending on its charge:
• one LED indicator: the power bank is charged to <25%;
• two LED indicators: the power bank is 25-50% charged;
• three LED indicators: the power bank is 50-75% charged;
• four LED indicators: the power bank is charged to >75% charged.
If no LED is displayed after pressing the button, the power bank is completely discharged.

Charging the power bank

Charge the power bank before using it for the first time. We recommend checking the charge
status of the power bank before each use.
Plug one end of the charging cable into the USB-C or Micro USB port of the power bank and
the other end into the USB port of your notebook or AC adapter (100-240 V ~; adapter not
included).
Depending on the state of charge of the power bank, the corresponding number of LEDs will
light up and another LED in the row will flash. As the power bank charges, all LEDs will flash and
light up. When all the LEDs light up, the power bank is fully charged.
When charging is complete, disconnect the power bank. The charging time depends on the
charger used. If the power bank will not be used for a long time, charge / discharge it to 50%
of its capacity and check its charge level regularly.
Device charging
You can charge the device with USB-A or USB-C ports of the power bank. Plug one end of the
power cord into a USB port on your device and the other end into the USB port on the power
bank. Depending on the state of charge of the power bank, the corresponding number of
LEDs will light up and the last LED in the row will flash. As the connected device charges, the
LED indicators will gradually turn off.
ENGLISH 7