Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7. Dismantling and Re-Fitting
Dismantling and
Re-Fitting
WARNING
Danger through a break in an
individual component. Under no
circumstances should the tightening
bolts be completely removed.
1.
2
Example: Series 23
2.
2
1
1
1
1
1
1
Wear protective glasses.
For the series 21
The removal of the cardan shaft
is carried out at the same time as
that of the cardan shaft coupling by
loosening the tightening bolts. When
doing this, proceed as in steps 2
and 3.
For the series 23 and 23
Model B: Firstly, all coupling bolts
are loosened and the cardan shaft
removed. For Model A the sequence
is arbitrary.
Loosen each of the tightening
bolts uniformly in turn.
NOTE
At the beginning only
for a quarter turn.
NOTE
Continue with step 3 if the
outer ring is not automatically
released from the inner ring.
[ EN ]
90°
29
Werbung
