Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Mounting
3.
1
1
1
1
1
1
Example: Series 23
4.
5.
4
5
6
2
1
3
3
3
3
3
3
2
3
2
1
9
8
7
Tighten the tightening bolts and pay at-
tention to steps 4 and 5 when doing this.
For the series 21
The cardan shaft is connected to the
shaft at the same time as the cardan
shaft coupling.
For the series 22 and 23
Model B: Firstly, tighten the tightening
bolts. Then, connect the cardan shaft
to the coupling using coupling bolts.
For Model A the sequence is arbitrary.
Tighten four bolts evenly
distributed over the circumference
using reduced torque (approx. 50
to 70% of maximum tightening
torque).
Tighten the tightening bolts uni-
formly, one by one, over several
revolutions (not crosswise).
NOTE
The maximum tightening torque
may not be exceeded.
[ EN ]
27
Werbung
