Herunterladen Inhalt Inhalt Diese Seite drucken

Device Description; Preparing For Use - UNIPRODO UNI TRAMPOLINE 01 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
bb)
Do not use the product when the surface is dirty or
wet, or during adverse weather conditions.
cc)
Do not bring objects inside the trampoline. Before
entering the trampoline, make sure that the pockets
of clothing are emptied of unnecessary and sharp
objects.
dd)
When using the trampoline, it is recommended to use
sports clothing and socks. Do not wear shoes.
ee)
Stay in the centre of the trampoline when using it to
minimize the risk of damage to springs or impact with
the frame.
ff)
The product should only be used by one person at a
time. Multiple people using the product at the same
time increases the risk of injury in the event of a
collision between users.
gg)
DO
NOT
perform
and other acrobatics. This increases the risk of a
dangerous fall, e.g. on the head, which can result in
serious injury, paralysis or death.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The trampoline is a device designed for performing
gymnastic exercises.
The user is liable for any damage resulting from
unintended use of the device.

3.1. DEVICE DESCRIPTION

8
6
9
2
1. Feet
2. Lower safety net
3. Upper safety net
4. Post
5. Foam cover
6. jumping mat
7. Cover for elastic rope and circular frame
8. Velcro net fastener
9. Entrance

3.2. PREPARING FOR USE

Assembling the device
1)
Assemble the upper rails by sliding the narrow end of
one rail into the wide end of another rail. Assemble
the rails till they form a circular frame.
7
somersaults,
leaping
turns
3
5
4
7
1
EN
2)
Place the circular frame on the ground and insert the
tapering ends of the feet into all six leg openings.
3)
Align the bolt hole in the leg with the hole in the leg
socket. Secure the connection with a bolt. Tighten
carefully.
4)
Put the circular frame on the legs.
5)
Make sure that the recesses in the circular frame are
properly aligned with the feet.
6)
Hold the bouncing mat by one of the nylon patches.
Using the suspension rope, attach the bouncing mat
to the frame ring. The suspension rope has a plastic
head that acts like a clamp after stretching and
prevents the suspension rope from detaching.
7)
Find the nylon patch opposite to the one already
hooked and attach it to the circular frame with
a suspension rope while applying the maximum
tension to the bouncing mat.
8)
Repeat steps 6 and 7 on the 16th nylon patch
counting from the first suspended patch. Repeat this
action on the opposite side of the circular frame.
9)
Repeat steps 6 and 7 on the 8th nylon patch counting
to the right of the patch suspended in the previous
step. Repeat the action on the opposite side of the
frame.
10)
Repeat step 9 counting to the left of the patch
suspended in step 8.
11)
Keep suspending the bouncing mat by nylon
patches repeating steps 6 and 7. Once you attach a
suspension rope on one side, remember always to
attach one on the opposite side of the mat.
12)
Fit the cover for the suspension ropes and the circular
frame with the inscription up. Make sure that the
cover is positioned so that it does not cover the holes
for the posts.
13)
Carefully run the lower safety net around the outside
of the legs.
14)
Align the grommet of the lower safety net with the
hole at the leg and fix it using a bolt. Repeat with the
other legs.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Uni trampoline 02Uni trampoline 03

Inhaltsverzeichnis