Bosch EasyComfort TDS 6041 Gebrauchsanleitung Seite 16

Using your appliance
3x
2x
16
B O SC H
1. Filling the water tank
This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other
liquids, such as perfume, vinegar, starch, condensation
water from tumble dryers or air conditioning systems, or
chemicals will damage the appliance. Any damage caused
by the use of the aforementioned products will make the
guarantee void!
1 Open the filling lid (11).
2 Fill the water tank (9). Never fill beyond the level
"max" (10) for maximum filling !
3 Close the filling lid.
4 Refill the water tank when the indicator light (3) comes
on. Three beeps will be heard.
Important: Once refilled, press button (3).
Tip: To prolong the optimum steam function, you may mix
tap water with distilled water 1:1. If the tap water in your
area is very hard, mix tap water with distilled water 1:2.
ºC
2. Heating
1 If your steam station is equipped with an iron lock
system (13*), release the iron by pressing the
2 Unwind the steam hose (5) and the mains cable (6).
Plug mains cable into an earthed socket.
3 Press the button (1) to switch the appliance on.
Indicator lights (1, 15) will flash indicating that the
appliance is heating up.
4 When the iron is ready to use, the indicator lights
(1, 15) will remain permanently lit. Two beeps will be
heard.
button.
* Model dependent