Werbung
Verfügbare Sprachen
Verfügbare Sprachen
After using a car wash, the camera's
•
detection range may change due to
mechanical effects. Be sure to check
for this and readjust the camera if
necessary.
•
Even if the fuse inside the 12 V plug
is tripped, backup camera system's
camera and wireless transmitter will
remain ready for use.
•
If you are unsure how to install
the backup camera system con-
sult a qualified specialist or have
the system installed by a qualified
specialist.
When removing dirt or ice and snow
•
from the camera lens be extremely
careful so as not to scratch it.
•
Do not wear metal body jewelry
when installing the backup camera
system. Doing so could result in a
short circuit and burns!
•
Run the cables so as not to cause
tripping hazards and the cables
cannot be damaged by e.g. objects
with sharp edges! Do not run cables
across hot surfaces!
PRODUCT
DESCRIPTION
1
4
5
7
8
Image 1
1. Reversing camera with connecting cable and
plug to connect to the transmitter
2. Infrared LEDs
3. LCD monitor
4. Radio transmitter with connector cable and
socket to the camera, including connector cable
with a red and black cable for connecting the
transmitter to the reversing light
5. Monitor cable with 12 V car plug
6. Cable ties for securing the transmitting equip-
ment
7. Mounting brackets
8. Gasket as edge trim for the cable gland bore
9. Clamped connections for connecting to reversing
light wires
10. Thread screws for attaching the camera to the
mounting bracket
11. Clamping nuts for securing the thread screws
12. LCD monitor retaining strap
English 23
3
2
6
9
10
11
12
Werbung
