AEG 11125 Bedienungsanleitung Seite 19

The device may be used in countries within the EU.
The backup camera system requires an input volt-
age of 12 V / DC. Cannot be operated via 24 V / DC!
Attention:
Risk of property and personal damage!
This device is not intended for use by children or
persons with limited mental capacity or lacking
experience and/or lacking expertise. Children must
not play with this device. Cleaning and user main-
tenance must not be performed by children without
supervision.
This device is not intended for commercial use. Any
other use or modification of the device is considered
improper and involves significant risks.
The manufacturer assumes no liability for damages
due to improper use.
Contents
Check the package contents immediately after un-
packing. Check the device and all parts for damage.
Do not use a defective device or parts.
•
Reversing camera
•
Transmitter
•
Monitor
•
Mounting plates
•
Mounting materials
•
Monitor cable with 12 V car plug
•
operating instruction
Please include all relevant documentation to other
users!
The operating instructions are also available at the
following Internet address:
http://iuqr.de/11125
Technical specifications
Model
Article No.
Ambient temperature
Backup speed
Transmission range
Frequency
Max. transmission power
Camera
Sensor
Resolution
Night vision
Angle of view
Sensor
Exposure compensation
White fader
Camera tilt
Power supply
Monitor
Display
Resolution
Dimensions
(L x W x H)
Power supply
Fuse
English 19
Mirror Reversing Camera
11125
-10 °C ~ +45 °C
max. 3 km/h
max. 10 m
2414 Mhz
7.33 dBm EIRP
CMOS
640 x 480 px
7 infrared LEDs
110°
1/4 " CMOS
automatic
automatic
variable adjustment angle
to approx. 30°
12 V DC , max. 0.2 A
10.9 cm / 4.3 inch TFT LCD
(11.7 cm)
480 x 272 px
approx. 123 x 77 x 21 mm
12 V DC, max. 0.3 A
250 V, T1AL