Pyramis FSP 178 INOX Gebrauchsanleitung Seite 9

Installation
Door Reversibility
Before reversing the door, please be prepared below tools and material: straight screwdriv-
er, cross screwdriver, spanner and the components included in the poly bag:
Left Hinger x1
1. Close upper door, take out the screw from the top hinge covers by cross screwdriver.
Take off hinge cover, disconnect the terminal, then unscrew top hinge and take off upper door.
2. Please upwarp and take off plastic cover and wire sleeve by straight screwdriver. Please be careful of the wire
inside. Then move wire with connector to another side and install wire sleeve to another side and fix cover back.
3. Unscrew from the middle hinge by cross screwdriver, then take off the lower door.
Left hinge cover x1 Left middle stopper x2
left middle stopper
metal block x2
9