Operating Condition - Pyramis Fsp 178 Inox Gebrauchsanleitung

User Interface
Key operation:
A "FRIDGE" mode.
This key is workable both in User Defined Mode as well as Super Mode. After entering
the temperature control of the fridge compartment, this key flashes. By touching the
key consecutively, the temperature would change in a circle of "2℃, 3℃, 4℃, 6℃,
8℃", after which 5-second flashing means the selection of temperature is settled.
B "POWER COOL/ Locking / Unlocking" mode.
By touching this key to enter or exit the "POWER COOL" mode. If enters this mode,
the temperature of fridge room will cool down very quickly until it reaches 2℃ to satisfy
consumers need.
This model will exit in two ways:
- this mode will exit automatically until it keeps running 3 hours.
- this mode will exit manually by consumer touching this key.
- Unlocking: Press for 3 seconds in the mode of locking, all the keys would be unlocked
after the a beep.
- Locking: Press for 3 seconds in the mode of unlocking, all the keys would be locked after
the a beep.
All buttons will only valid under unlock mode.
No operation in 60 sec will lock the display automatically.
Display:
1. "POWER COOL" mode LED light display which indicates this mode function is valid or not now.
2. "LOCK" mode LED light display which indicates this UI control is Locking or unlocking now.
3. "FRIDGE" mode LED light display which indicates the setting temperature of fridge room now.

Operating condition:

‹ The control panel is 100% lit up for 3 seconds, which operates exactly as per the setting
(mode and temperature) before the power off. The system will be automatically locked 2
seconds after the last key operation. After locking, the light of the panel would be out 60
seconds after the last key operation.
‹ Both preset temperatures of fridge compartment would be shown on the display.
Temperature control of the freezer compartment
‹ Plug on your appliance. The internal temperature is controlled by a sensor. There are 3
settings: SUMMER,RECOMMENDED and WINTER.
‹ The appliance may not operate at the correct temperature if it is in a particularly hot or if
you open the door often.
Important! Usually we advise the user set the temperature control knob at "NORMAL" or
"RECOMMENDED". Set the temperature control knob at "SUMMER" in summer or hot days.
If the ambient temperature is very high (above 43℃), consider adjusting it to the dotted line
on the left. Set the temperature control knob at "WINTER" in winter or cold days.
If the ambient temperature is very low (below 10℃), consider adjusting it to the dotted line
on the right.
13