Cleaning The Nozzle; Repair/Maintenance - Capitani Mini Office Plus Gebrauchsanweisungen

How to empty the capsule drawer
•If the small cup led
(C) flash, it means that 50 capsules have been used and the
removable capsules drawer (4) is full.
In such a case, coffee will not be delivered.
Remove the capsules drawer (4), empty it and rinse
(Fig.14). Clean the drawer and the grid to remove water and
coffee residues. Once cleaned, insert back the tray containing
the capsules drawer (4).
Reset the machine by pressing the dispenser button
(A) for two seconds or turn the machine off and on again
pressing the main switch (5). (Fig. 15).
Storing the coffee machine away
- Power off and unplug the machine if it is not going to be used
for a prolonged period of time.
- Store the coffee machine in a dry place, away from dust and
out of the reach of children.
- We would advise you to store the machine in its original
packaging.
- Temperatures in the storage area should not be lower than
5°C, to avoid damage to the inner parts of the machine from
water freezing inside it.

Cleaning the nozzle (12)

Remove the nozzle (12) from its seat by pulling it downwards.
Wash it thoroughly and remove any residues of coffee.
Once the nozzle is clean, push the nozzle back into position
as far as it will go (Fig. 16)
REMOVING LIME SCALE
The formation of lime scale is the natural consequence of use
of the machine. Lime scale must be removed every 1-2 months;
if the water is very hard, descale the machine more frequently.
To remove lime scale you can use a non-toxic or non-harmful
descaling product for coffee machines, readily available on
the market. Fill the tank with the descaling solution, following
the instructions on the descaler pack.
After carrying out a second rinse cycle with clean water, fill the
tank again. In this way the machine is ready for use.

Repair/maintenance

In the event of a malfunction, or if the machine is dropped and a defect arises or is suspected,
unplug the machine and call an authorised service centre. Never operate a defective machine.
Only authorised service centres can service or repair the appliance. The manufacturer disclaims
responsibility for any damage and/or injury that may result in the event of service that is carried
out in breach of the applicable safety regulations or is executed by unauthorised personnel.
(A) and the long cup led
26
A
C
Fig. 14
5
Fig. 15
Fig. 16
4
4
12