St ar ting/warming up t he cof f ee mac hine
• Use only capsules that are specific for this model.
•Plug the coffee machine into an electrical socket.
•Power the coffee machine by turning on the main switch (5).
(Fig.4)
• The control buttons will start flashing; once the right
temperature is reached, they will illuminate steadily, indicating
that the machine is ready for use (Fig.4).
Rinsing the machine/inner circuits
The coffee machine should be rinsed both at its very first use
and when it has been inoperative for a long spell of time. By
performing this quick procedure, you will ensure that all inner circuits
are rinsed.
•Ensure that there are no capsules inside; power on the
machine via the main switch(on the back) (5)
•Place a large empty cup under the coffee/tea/drinks
dispenser. (Fig. 5)
• Press the rinse button
delivery is complete. The machine is rinsed when at least 3
water glasses have been delivered.
NOTE
Open the support (11) to prepare espresso coffee correctly
and to use small cups (Fig. 7).
To use large cups, close the support (11) and place the cup
directly on the grid of the drip tray (4) (Fig. 5)
11
Fig.7
(D) (Fig.7) and wait until the
22
5
Control buttons
Fig. 4
Fig.5
D
Fig.6