Manhattan Charging Cart - 576 Benutzerhandbuch Seite 2

1 Connect AC power cable from
charging cart to power outlet.
2 Enter user password (1 2 3 4 ; see
Passwords section) into keypad and
press OK; a long tone sounds and
open-lock symbol
knob to OPEN and open door.
3 Load devices in bays.
4 Connect USB cables from cabinet
ports to devices. Close door ; turn
the main power switch to ON (LEDs:
red = charging; green = standby).
Powering Other Devices (Optional)
5 a) Connect to the USB-A port
to charge a device.
5 b) Power up to two additional devices
by connecting power cords to outlets.
Lock Cabinet
With door closed, turn
keypad knob to LOCK.
• Low battery
keypad batteries.
6 Replace batteries: Remove
battery compartment
[ * ] on keypad, replace
CR2032 batteries and
reinstall compartment.
2
English
Setup
lights. Turn
Battery
: if lit, replace
1
2
3
4
5
*
6
Inserting the battery
User Manual
a
b
Removing the battery