Commissioning.
All connections of the device should be made before switching on. Only use high-quality cables that
are as short as possible for the connections.
Configuration of the DMX connector:
DMX operating mode:
Connect the DMX input of your device to the DMX output of your DMX controller, your DMX
software or the DMX output of a device already in your DMX chain. Always use a DMX cable with
a 110 Ohm resistor for this connection. Address the device according to your DMX configuration.
The device has a DMX mode with 3, 4 or 7 channels, which are based on the following functions:
3 channel mode:
DMX adress:
1
2
3
4 channel mode:
DMX adress:
1
2
3
4
16
All manuals and user guides at all-guides.com
DMX value:
000-255
000-255
000-255
DMX value:
000-255
000-255
000-255
000-255
DMX function:
red (0-100%)
green (0-100%)
blue (0-100%)
DMX function:
red (0-100%)
green (0-100%)
blue (0-100%)
white (0-100%)