Zanussi ZBF22451SA Benutzerinformation Seite 18

DISPLAY
A
SWITCHING ON
1. Connect the mains plug to the power socket.
2. Press the appliance ON/OFF if the display is
off. The temperature indicators show the set
default temperature.
The alarm buzzer could operate after
few seconds.
To reset the alarm refer to "High
temperature alarm".
To select a different set temperature refer to
"Temperature regulation".
If "dEMo" appears on the display, refer to
"Troubleshooting" .
SWITCHING OFF
1. Press the appliance ON/OFF for 5 seconds.
The display switches off.
2. Disconnect the mains plug from the power
socket.
TEMPERATURE REGULATION
Set the temperature of the appliance by pressing
the temperature regulators.
Default set temperature:
• -18°C for the freezer
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set
temperature remains stored.
QUICKFREEZE FUNCTION
The QuickFreeze function accelerates the freezing
of fresh food and, at the same time, protects
foodstuffs already stored from undesirable
warming.
1. To activate this function press the Mode button
until the corresponding icon appears.
The QuickFreeze indicator flashes.
2. Press the OK button to confirm.
The QuickFreeze indicator is shown.
18
B C
F E D
A. Timer indicator
B. QuickFreeze function
C. Temperature indicator
D. Alarm indicator
E. ChildLock function
F. DrinksChill function
This function stops automatically after 52 hours.
To switch off the function before its automatic end
repeat the procedure until the QuickFreeze
indicator turns off.
The function switches off by selecting
a different set temperature.
CHILDLOCK FUNCTION
Activate the ChildLock function to lock the buttons
from unintentional operation.
1. Press Mode until the corresponding icon
appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function, repeat the
procedure until the ChildLock indicator goes off.
DRINKSCHILL FUNCTION
The DrinksChill function is to be used to set an
acoustic alarm at the preferred time, useful for
example when a recipe requires to cool down food
products for a certain period of time.
It is also useful when a reminder is needed in order
not to forget the bottles placed in the freezer for
fast cooling.
1. Press Mode until the corresponding icon
appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes) for a
few seconds.
2. Press the Timer regulator to change the Timer
set value from 1 to 90 minutes.
3. Press OK to confirm.
TheDrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm sounds.
Press OK to switch off the sound and terminate the
function.
To switch off the function repeat the procedure
until the DrinksChill goes off.