Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Canada Compliance Statement
WARNING This Class (B) digital apparatus complies with Canadian ICES-003. This device complies with
Industry Canada's licence-exempt RSS 247. Operation is subject to the following two conditions:
1) This device may not cause interference; and
2) This device must accept any interference, including interference that may cause undesired operation of
the device.
Components (pic. A)
A:1. Headband of thermo plastic
A:2. Stirrup attachment with firm and easy size adjustment
A:3. Replaceable foam filled ear cushions
A:4. FM radio aerial with excellent reception sensitivity
A:5. Level Dependent "Active Listening" microphones
A:6. Connection cable between left and right ear cups
A:7. Noise suppressed boom microphone
A:8. Replaceable foam filled head cushion
A:9. Helmet/Cap attachment of thermo plastic, 30 mm standard
A:10. On/Off-Volume knob for AM/FM radio
A:11. Knob for radio station selection
A:11b. AM/FM switch
A:12. On/Off-Volume knob for Level Dependent function
A:13. 3,5 mm input for connection to external sound sources
A:14. Bluetooth® multi-function knob
A:15. Bluetooth® LED light
A:16. Battery lid (easy to open without using tools)
A:17. Socket for boom microphone
A:18. Charging socket
Accessories and spare parts
B:1. Hygiene kit: 99403-001
B:2. Sweat absorbers: 99900-001
B:3. Windshield boom microphone: 16999-001
B:4. USB cable: 39926-001
B:5. Rechargeable AA batteries: 17173-001
B:6. 3,5 mm stereo connection cable: 39922-001
B:7. Boom microphone: 16982-001
B:8. Windshield level dependent microphones: 1059-001
Change of hygiene kit (pic. E)
1. Remove the old sound absorber foam and insert the new
2. Pull off the old ear cushion
3. Centre the new ear cushion over the hole
4. Press with a finger along the outside of the ear cushion until it attaches all around the edges
5. (only for headband models) Pull off the old head cushion and insert the new
Important!
Earmuffs, and in particular cushions, may deteriorate with use and should be examined at
frequent intervals for cracking and leakage.
Hygiene kit should be changed at least twice per year. Make sure you choose the correct hygiene kit for your
hearing protector. (B:1)
Approval and technical data (see table F)
F:1) Headband
F:2) Helmet mount
F:3) Tested and certified to (standards)
F:4) Weight
F:5) Mean attenuation
F:6) Standard deviation
F:7) Assumed Protection Value
F:8) Tested and certified by (notified body)
F:9) Electrical input level (3,5 mm AUX)
F:10) Size
11
Synergy
Synergy
Werbung
