insta360 Ace pro Gebrauchsanleitung Seite 9

Maintenance
① Do not open the Dive Case while it is wet.
② After using the product in seawater, remove the camera and soak the Dive Case in freshwater
for at least 60 minutes. If the Dive Case is not soaked after use in seawater, residual salt may
cause water leakage. After soaking the Dive Case in freshwater, rinse it gently under the tap.
Never apply a high-pressure water flow from a single direction, as it may cause leakage.
③ Ensure that the Dive Case is firmly closed before washing. After washing the Dive Case, wipe
away any water droplets remaining on the surface with a soft, dry cloth. Do not dry it with a hair
dryer, clothes dryer or stove.
④ Ensure there is no sand on the Dive Case before drying. Sand may scratch the product surface
when wiped with a cloth.
⑤ Do not store the Dive Case in a hot and humid environment. In particular, do not leave it inside a
hot car.
⑥ Do not wash the Dive Case with soap, neutral detergent or alcohol cleaning products. This may
degrade the waterproofing performance.
⑦ Do not clean the Dive Case with organic solvents (such as diluents, alcohol or gasoline).
⑧ Store the product in a dry, well-ventilated location.
7