Installation - Cooper Rz 5000 Cg-S Betriebsanleitung

Weight
RZ 5000 ...: 0.52 kg
RZ 5004 ...: 0.52 kg
RZ 5024 ...: 0.72 kg
RZ 5001 ...: 0.86 kg
SL/RZ 5031 ...: 1.12 kg
Sl 5015 ...: 2.1 kg
Supply terminals
RZ 5000 ...
RZ 5004 ...
RZ 5024 ...:
RZ 5000 ... 2 x 2,5 mm²
SL 5015 ...
SL/RZ 5031 ...: 3 x 2,5 mm²
Input voltage:
AC: 230 V 50/60 Hz
DC: 220 V
+25%/-20%
Rated current (DC)
RZ 5004 ...: 20 mA
RZ 5024 ...: 20 mA
RZ 5000 ...: 35 mA
RZ 5001 ...: 30 mA
SL/RZ 5031 ...: 35 mA
Sl 5015 ...: 45 mA
Power consumption (AC)
RZ 5004 ...: 10 VA
RZ 5024 ...: 10 VA
RZ 5000 ...: 16 VA
RZ 5001 ...: 16 VA
SL/RZ 5031 ...: 16 VA
Sl 5015 ...: 21 VA
Perm. ambient
temperature: -10 °C .. +40 °C
Lamps
RZ 5004 ...: 4 W/T16
RZ 5024 ...: 4 W/T16
RZ 5000 ...: 9 W/TC SEL
RZ 5001 ...: 8 W/T16
SL/RZ 5031 ...: 9 W/TC SEL
Sl 5015 ...: 13 W/T16
Insulation class:
RZ 5004 ...: II
RZ 5024 ...: II
RZ 5000 ...: II
RZ 5001 ...: I
SL/RZ 5031 ...: II
Sl 5015 ...: I
Protection category acc.
to EN 60529: IP 20
Viewing distance
RZ 5004 ...: 17 m
RZ 5024 ...: 17 m
RZ 5000 ...: 17 m
RZ 5001 ...: 17 m
RZ 5031 ...: 34 m
Luminous flux ratio
F /F at the end of rated
E N
duration: 75 %

4. Installation

4. Installation 4. Installation
4. Installation 4. Installation
For the mounting and
operation of electrical
apparatus, the respec-
tive national safety regulations
(e. g. equipment safety law for
Germany) as well as the
general rules of engineering will
have to be observed.
Prior to installation turn off all
power supplies and secure
against unauthorized switching!
Pay attention to a tight fit of
the terminal screws! Unused
cable entries are left with their
locking plug fitted (IP protection).
SL/RZ 5031 CG / SL/RZ 5031 CG /
SL/RZ 5031 CG / SL/RZ 5031 CG / SL/RZ 5031 CG /
SL 5015 CG SL 5015 CG SL 5015 CG SL 5015 CG SL 5015 CG
- Dismount side parts and
reflecto
- Remove quick mounting set
- Dowel quick mounting set
with two screws.
- Connect mains to terminals
L (U), N (0) and PE
- Fit enclosure to quick
mounting set.
- Loose fastener at the quick
mounting set to enclosure.
- Lock enclosure and and
tight locking device.
- Address luminaire (see
chapter 5).
- Insert reflector, lamps and
cover.
- Mount side parts.
- Mark luminaire.
13