NEP BDM-300 Schnellinstallationsanleitung

Installing NEP BDM-���/���X/���
BALCONY SOLUTION
To install NEP Balcony Solution Micro Inverters (MI), read and follow all
warnings and instructions in this guide and in User Manuals for
corresponding model.
PREPARATION
- The PV module(s) should be securely attached to the racking.
- Check if the MI is intact without loss components.
- A tail cable is prepared.
- Tail cable has � different length (�m, ��m, ��m), if the cable
received is not suitable for the installation, contact your distributor
for an exchange.
Micro Inverters
QUICK INSTALLATION GUIDE
INSTALLATION
Mount the MI
�
- Attach the MI on racking or PV module frame
Connect the DC
�
- Plug in the MC� terminals to DC socket on MI
- Make sure each PV module is connecting to
one DC socket pair.
Connect the AC terminal
�
DO NOT CONNECT MI AC TO SOCKET
Detection of Grid AC power will deactivate AP mode of MI
- Plug the terminal the tail
cable to AC Terminal on the
MI, till a "click" sound heard.
NEP Micro Inverters