Add Camera - ELRO CI5000 Handbuch

5. Add camera

The camera can easily be added using the QR Code. Follow the steps carefully and the camera will
be added to the app within minutes.
a. Insert the power plug into the back of the camera and plug
in the adapter. Wait a few seconds until the camera
automatically spins around and plays a cheerful music.
The camera indicates: ''Waiting for Connection''.
b. Go to the ''Home'' tab Press the ''+'' right at the top and select ''Add device''.
c. In the left-hand row, select the ''Camera'' category and press ''CI5000''.
d. When you hear ''Waiting for Connection'', you can tick the box. When this is ticked, you
can press the ''Next'' button.
e. The WiFi name is filled in automatically. Then enter the password of
this network. Press ''Next''.
f. A QR-Code will now appear on the smartphone screen. Hold this
QR-Code about 20 cm in front of the camera so that the camera can
read it.
g. The camera will say ''QR-Code Scanning Succeeding''.
Then the camera says ''Connecting to wifi''.
When successful, the camera says ''Wifi is successful''.
After this, press ''I heard a prompt''.
h. The camera is now automatically added to the app.
When the addition is successful, the app will indicate this. Then press ''Done''.
i. The camera is now successfully added to the app and will immediately play live footage.
Important
- Connect to your router/modem's 2.4Ghz WiFi signal.
- The camera has no ability to use AP mode, EZ mode or Cable mode.
- 4 -