Werbung
Verfügbare Sprachen
Verfügbare Sprachen
To activate / deactivate the safety child lock, keep
pressing the button combination for approx. 2 sec-
onds after starting the program.
4
Favorite
After selecting the operating conditions, keep press-
ing the button for approx. 3 seconds. Your favorite
program is stored on this button.
The operating conditions remain stored until you
change it using the same procedure.
Mute
To activate / deactivate the acoustic tones, keep
pressing the button combination for approx. 2 sec-
onds.
5
Options
Selection button for the following options:
Prewash
Additional wash cycle to the previously set main
wash program, for particularly dirty laundry.
Extra Rinse
Additional rinse cycle to the previously set main wash
program, detergent residues are rinsed out.
Intensive
Increased washing duration / intensity for a better
cleaning effect on heavily soiled laundry.
6
Delay end function
The end of the program can be delayed between
1 – 24 hours
by repeatedly pressing the button.
2:00→3:00→4:00→5:00→6:00→.....→24:00↩
↪1:00→
Based on the selected program, the appliance calcu-
lates the program duration at which the operation will
be started automatically to reach the selected end-
time for switching off.
Prerequisite: The delay time must be longer than the
program duration of the selected washing program.
The expected end of the program (delay end + pro-
gram duration) is shown on the display, the program
is ended after [x:xx] hours.
7
Start/Pause
Press the button to start / pause the selected or run-
ning washing program.
After the start of the washing program, the remaining
time is shown in the display as [x:xx] hours and
minutes.
If the appliance is in pause mode, the current display
messages flashes.
8
Display messages / indicator lights
Display for settings and information:
Favorite program set
Delay end function active
Door lock active
Laundry can be added
Safety child lock active
Mute active
Option Prewash active
Option Extra Rinse active
Option Intensive active
End
End of washing program
various error codes are displayed in case of mal-
function
Program status:
Prewash cycle
Main wash cycle
Rinse cycle
34
Werbung
