Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
6.0 Maintenance and Repair
Maintenance and repairs should be carried out only by or under the supervision of qualified persons.
During any maintenance or repair work, the main switch of the machine needs to be tur ned off and must be
secured against unauthorized turning on to prevent the machine from restarting.
While servicing the machine has to be unplugged so that the network connection can't be reestablished
inadvertently. Only use the manufacturer's original spare parts and equipment that is recommended to use by the
manufacturer such as saw blades, coolants, hydraulic oils, etc.
Use proper tools for maintenance and repair works.
For cleaning, never use flammable solvents or detergents or substances that are known to develop hazardous
vapors. Motors and other electrical components shall be protected during cleaning against the ingress of
moisture of any kind. Prior to release for operation after maintenance or repair the machine must be checked
whether all safety devices are working properly.
7.0 Accessories and parts
Genuine Parts and Accessories are specifically designed for the deburring machine.
The installation and / or use of products that are not supplied or recommended by us can have negative influence
regarding the machine's performance and durability.
FLOTT is not liable for any damage occurring due to the use of non-original spare parts and/or the use of any not
by FLOTT recommended part or any service or reconstruction work unauthorized by us.
The operator is responsible for the proper and reliable assembly of all original machine parts and accessories
supplied loose with the machine like guards, etc.
16
373153 D/GB
Werbung
