Bestway AquaDrift 58665 Gebrauchsanweisung Seite 2

TECHNICAL SAFETY INSTRUCTIONS
Save These Instructions – Read carefully before operating.
Follow all safety and operating instructions. This will help to optimize the performance of the robot
• To reduce the risk of injury, do not allow children to use, assemble or disassemble this product. Adults only.
• Do not remove or obstruct the float opening while the filter pump/sand filter is operating.
• Do not use the filter pump/sand filter while the pool is occupied.
• Ensure the filter pump/sand filter is unplugged before any maintenance begins to avoid risk of injury or death.
SETUP
PARTS & TOOLS NEEDED
Compare the parts in your box to the parts listed in this manual. Verify that the equipment components represent
the model that you had intended to purchase. If any parts are damaged or missing at the time of purchase,
please turn to the shop for help.
• Compatible with round above ground pools up to 6.70 m (22 ft.) in diameter and oval or rectangular above ground pools
up to 6.70 m (22 ft.) in length.
• Not compatible with: In-ground pools, Round Hydrium pools, Oval Hydrium pools.
• Compatible with: Filter Pumps and Sand Filters with flow rates from 1,500-3,200 gal./h (5,678-12,113 L/h)
Important: Remove the brushes from the cover of the debris
screen if you are using a 1,500 gal. (5,678 L) filter pump. This
will optimize the performance of the robot. Keep the brushes in
place if you are using a higher filtration system within the listed
compatibility.
For the setup instructions, you can refer to the steps in the section
NOTE: Drawings are for illustration purposes only. May not reflect actual product. Not to scale.
Pressure Release Valve
• The robot can be used with filtration pumps with different flow rates. To optimize the performance of the robot, the pressure
release valve must be set to the correct position. Below, you will see the different valve positions in reference to different
pump flow rates.
IMPORTANT: If the setting of the pressure release valve is not correct, the speed of the robot could be too high or too
low, and it will reduce the performance of the robot.
OWNER'S MANUAL
_
+
1,500 gal.
(5,678 L)
1,500 gal.
(5,678 L)
1,500 gal.
(5,678 L)
.
_
+
>1,500 - <2,500 gal.
(>5,678 - <9,463 L)
2
_
+
≥2,500 - ≤3200 gal.
(≥9,463 - ≤12,113 L)
2,500 gal.
(9,463 L)