Nightfox PROWL Gebrauchsanweisung Seite 9

10. Important tips for using the infrared LEDs
The Prowl has two IR LEDs: a 940nm wavelength for stealth, and
•
an 850nm wavelength for range.
All IR LEDs produce a red glow, visible to the human eye. 940nm
•
LED produces less glow than 850nm LED, but 850nm provides a
longer viewing range than 940nm.
The Prowl's default factory setting uses 940nm for IR levels 1-3,
•
and 850nm for IR levels 4-5. Alternative options are available by
entering Settings mode (see section 12).
Important: other night vision devices can detect the IR light
•
emitted by the Prowl.
In dark environments with some ambient light, use the
•
"Lunarsight" setting (IR:0) to use no IR LED at all.
Reducing usage of the IR LEDs saves battery.
•
11. Playback mode
Press M until
•
screen.
The LCD screen will show the last file saved. Press IR to go to
•
the previous file, and press IR to go to the next file.
Press REC/OK to enter the playback menu and use IR and IR
•
to navigate. Use REC/OK to select from the menu options,
which are to:
play the selected video
›
delete the selected video
›
delete all videos
›
exit the menu
›
Selecting either 'delete' option will cause a thumbnail of the
•
image to appear with a pop-up menu, requesting confirmation
before deletion.
shows on the top left-hand corner of the
E ngl is h
8