Nightfox PROWL Gebrauchsanweisung Seite 10

12. Settings mode
To enter Settings mode, press M until the Settings menu is
•
displayed.
Use IR and IR to navigate the menu. Press REC/OK to select a
•
menu option.
Setting
Night filter Select "Black and White" or "Green" for night time use.
Selecting "Green" will apply a green filter to the image,
imitating the phosphor green effect found on image
intensifier night vision devices.
IR settings Select 850nm, 940nm, a combination of both or no IR.
Autohide Turn on or off autohide icons on LCD screen.
icons
Format SD Delete all files currently on the micro SD card.
Power save Set the device to power-off after a period of non-use. If
enabled, the options are 30 or 60 minutes.
Date The date and time are in the format YYYY / MM / DD,
HH:MM:SS.
and
Press REC/OK to begin amending the selected number.
Time
Use IR and IR to adjust the values. Press REC/OK to
set the number and IR to move onto the next field.
Once the date is correct, press REC/OK again to save
and M to return to the settings menu.
Flicker Determines the refresh rate of the LCD screen. The
device arrives with the correct setting for its
geographical area.
Date/time Choose whether a date and time stamp is included in
tag recorded videos.
Frame rate Pick the frame rate of the AVI video recordings produced. A
higher frame rate may improve video quality but will
increase the video size.
Factory Restores all settings to factory defaults.
reset
Version Shows the current firmware version.
Description
E ngl is h
9