Nightfox PROWL Gebrauchsanweisung Seite 6

4. Charging the Prowl
The Prowl charges like a
•
phone or tablet, using a
USB-C interface.
To charge the battery, plug
•
the provided USB-C cable
into a USB port. This could
be a USB port on a laptop or
computer, or phone charger.
Open the USB cover. Plug the provided USB-C cable into the
•
charging port. Charging time is approximately four hours.
It is recommended that the Prowl is charged at least once every
•
three months, even when the monocular is not in use. This helps
to activate the battery regularly and extend the battery life.
5. Inserting a micro SD card
The Prowl is preinstalled with a 32GB
•
memory card. To remove the card,
open the USB cover. Push the memory
card in to release it. When the card is
partially ejected, it can be pulled
out.
To reinsert the memory card, ensure the gold pins are facing up.
•
Push the card into the slot to lock it.
6. Powering on the Prowl
Long press
•
is set to off. For night time use, press IR once to use
"Lunarsight" (IR0), then continue pressing IR to activate the IR
LEDs (IR1 – IR5).
View the LCD screen through the viewfinder, using the diopter
•
to adjust the eye relief.
. The device powers on and enters Video mode. IR
E ngl is h
5