Werbung
BATTERY AND CHARGER
Battery indicator 24V (V1)
The messages are shown on the LCD display.
Charging diode
Battery condition diodes:
Red (diode): Charging.
Orange (diode): Charging is recommended
Green (diode): Ready to operate
LCD display:
0-30%: Charging is recommended
0%: Charging has to be made.
Shortly after the indication of 0% on the display and flashing red diode, the driving speed is
reduced (display shows error 4.2). The battery has to be charged!
Battery condition is updated when fully charged and when driving function is activated.
When turning on:
The LCD display carries through a check that all diodes are working. The LCD display indica-
tes number of operating hours for some seconds, before changing to show battery condition.
Error codes
In case of errors, the display shows error codes:
Error code 1.4: The forward/reverse knob is activated, before the handle was placed in
drive position.
Error code 4.2: Battery discharged.
If the display shows other error codes, please contact your dealer.
Standby:
When display is in standby mode, stars are shown in the display. When activating the driving
function, battery condition is indicated (not hour meter and operations hours).
Tel. +45 76 88 16 00 . info@logitrans.com . www.logitrans.com
Red (diode): Indicates service and error -
see error code in LCD display.
LCD display (8 characters)
Battery condition diodes:
Red, orange and green
ENGLISH
S1020
5
Werbung
