Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from
date of purchase for $5... You can pay with AMEX, Discover, Visa or MasterCard
by calling 1 800-448-4639 during normal business hours... Payment must be
made within 30 days of purchase... Name, address, telephone number, purchase
date, and 5-digit model number required... You can also mail a check for $5 to:
Timex Extended Warranty, P...O... Box 1676, Dept... EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch... Your model may not have all of the features described in this
booklet.
FUNCTIONS
Real-time calendar clock, Second time zone, Countdown timer, Daily/weekday/
weekend alarm, hourly chime, Chronograph, INDIGLO
Night-Mode
feature...
®
BASIC OPERATION
Model Number: 055
SET OR DONE
(To save changes
and exit setting)
MODE OR NEXT
(Proceed to
next step)
INDIGLO
When setting, each button has a different function as indicated above... Watch
face will indicate when button changes function...
TIME/DATE/HOURLY CHIME/TIME ZONE
1... In TIME mode, press and hold
+
–
2... To set, push
or
to select first or second time zone...
NEXT
3... Press
... Hour digits flash...
+
–
4... Press
or
to change hour including AM/PM... (Scroll through 12 hours to
get to AM/PM)...
NEXT
5... Press
... Minute digits flash...
6... Press
+
or
–
to change minutes...
NEXT
7... Press
... Second digits flash...
+
–
8... Press
or
to set seconds to zero...
NEXT
9... Press
... Day of week flashes...
10... Press
+
to
–
to change day...
11... Continue pattern to set month, day of month, 12-hour or 24-hour time
display, MMM...DD or DD-MMM date format, turn hourly CHIME on/off, turn
BEEP on/off... If you select BEEP on, a beep will sound every time you push
a button (except INDIGLO
)...
®
DONE
12... Press
to confirm and exit or
zone, if desired...
13... When in Time mode, press and hold
time zone; hold for 4 seconds to switch time zones...
CHRONO
LAP 1 = 7.11
LAP 2 = 7.50
SPLIT 1 = 7.11
SPLIT 2 = 15.01
night-light with
®
START/SPLIT OR +
(Increase value... Hold
to increase rapidly...)
STOP/RESET OR –
(Decrease value... Hold
to decrease rapidly...)
BUTTON
®
SET
... Time zone will flash...
NEXT
to continue and set second time
START/SPLIT
to "peek" at second
LAP 3 = 7.08
LAP 4 = 7.30
SPLIT 3 = 22.09
SPLIT 4 = 29.39
MODE
1... Press
until CHRONO appears...
2... Press and hold
SET
3... The Display will read: FORMAT/SET, then LAP/SPL or SPL/LAP...
CHR indicator will appear...
+
–
4... Press
or
to select desired format...
DONE
5... Press
to confirm and exit...
®
6... To use chrono, press
exit the mode...
7... Press
STOP/RESET
START/SPLIT
running, press
displayed in the format you selected... The lap number will alternate with the
last two digits of the bottom line...
NOTES:
• Lap and split times will appear frozen for 10 seconds... Press
release the display and see running chrono...
STOP/RESET
• Press and hold
TIMER
MODE
1... Press
repeatedly until TIMER appears...
SET
2... Press
... Hour digits flash...
3... Follow same pattern as setting TIME and ALARM to set hours (up to 24 hrs...),
minutes, seconds, and select between REPEAT/AT END (timer counts down
and then repeats) or STOP/AT END (the timer counts down and then stops)...
4... Press
DONE
to confirm and exit...
START/SPLIT
5... Press
exit Timer mode... If REPEAT/END selected will flash... If STOP/END selected
will flash... Sub-dial rotates in counter clockwise direction when Timer is
running...
6... An alarm melody will chime and INDIGLO
has reached zero or before it starts to count down again...
STOP/RESET
7... Press
ALARM
Setting the ALARM is similar to setting TIME... Your watch model has three
alarms... Follow below procedure to set each alarm...
MODE
1... Press
repeatedly until ALM1, ALM2, or ALM3 appears... Select alarm
you want to set...
2... Press
SET
to set alarm...
3... Hour digits flash... Press
NEXT
4... Press
... Minute digits flash... Press
NEXT
5... Press
... If in 12-hour format, AM/PM flashes... Press
6... Press
NEXT
... Press
DONE
7... Press
to confirm and exit...
8... Press START/SPLIT or
disarmed, OFF will be displayed... When armed, the alarm indicator will appear
under ALM...
9... The INDIGLO
night-light and alarm icon flashes and an alert sounds when
®
the alarm goes off... Press any button to silence... A back up alarm will sound
after five minutes if you don't press any buttons...
INDIGLO
NIGHT-LIGHT WITH NIGHT-MODE
®
Press INDIGLO
button to illuminate watch display for 2 - 3 seconds
®
(5 - 6 seconds while setting)... Electroluminescent technology used in the
INDIGLO
night-light illuminates entire watch face at night and in low light
®
conditions... Any button pressed while INDIGLO
Press and hold INDIGLO
feature... Moon icon P will appear in Time mode... Feature causes any button
press to activate INDIGLO
may be deactivated by pressing and holding INDIGLO
4 seconds, or it automatically deactivates after 8 hours...
1
ENGLISH 055-095000-02
...
START/SPLIT
... Chrono continues to run even if you
to stop chronograph from running OR while chrono is
to take a split... Lap and split times will then be
to reset chronograph...
to start TIMER... Timer will continue to run even if you
night-light flashes when the timer
®
to stop TIMER... Press again to reset countdown time...
+
–
or
to change hour...
+
–
or
to change minutes...
+
or
–
to select DAILY, WEEKDAYS OR WEEKENDS...
STOP/RESET
to arm or disarm alarm... When
night-light is on keeps it on...
®
button for 4 seconds to activate NIGHT-MODE
®
night-light for 3 seconds... NIGHT-MODE
®
®
MODE
to
+
–
or
to change...
FEATURE
®
®
feature
®
button again for
Werbung
