Monacor CD-114/BT Bedienungsanleitung Seite 25

17
SPEED
LOW HIGH SINGLE
NOR PROG
REP/ RAN
15 16 18
1 2 3
6 7 8
25
Buttons on the player
5.6.7 Playing a loop
A section within a title can be repeated contin-
uously as a loop .
1) If the starting point of the section (point A) is
reached in the current title, press the button
"A > B" or "A  B" (23):
on the display .
2) At the end of the section to be repeated
(point B), press the button again:
appear . The section will be repeated con-
tinuously .
3) To exit the loop, press the button a third time:
will disappear .
A>B
5.6.8 Changing the speed and the pitch
The SPEED buttons (15) can be used to change
the speed and thus the pitch of the sound .
The setting range is:
−10 (minimum speed) ... 10 (maximum speed) .
Press the button LOW (to reduce the speed) or
HIGH (to increase the speed) repeatedly until the
desired speed is reached . Each time the button is
pressed, the display will briefly show the setting
selected, e . g .
= increase normal speed by 5 steps
PH 05
= reduce normal speed by 2 steps
PH-02
To quickly return to normal speed, press the
button NOR .
21 23
19
FOLDER PLAY/ A > B
SKIP
PREV NEXT STOP/ EJ MODE
20 22 24
4 5
CD/CARD
9 0 MEMORY
26
starts flashing
A>
A>B
15
25
Buttons on the remote control
5.7 "Bluetooth" mode
In "Bluetooth" mode, audio data can be trans-
mitted wirelessly from an audio source using
Bluetooth transmission (e . g . smartphone) to the
player CD-114 / BT .
1) To go from another operating mode to "Blue-
tooth" mode, press the button MODE (24)
repeatedly until the mode is selected . Until a
Bluetooth connection to a Bluetooth source
will
has been established, the display will show:
WAITING PAIR...
BLUE
2) Activate the Bluetooth function on the
Bluetooth source . On the list of available
devices, CD-114 / BT will appear under the
name "BLUE" . Pair the Bluetooth source
with "BLUE" (consult the instructions for
the Bluetooth source if necessary) . Once the
Bluetooth connection has been established,
the display will show:
CONNECTING ...
BLUE
3) Start the audio reproduction on the Bluetooth
source and operate the Bluetooth source as
desired . For operation, the following buttons
of CD-114 / BT can also be used:
– the button PLAY/ II (21) to start and pause
the replay
– the SKIP buttons (20) to select titles
SPEED
EJECT
LOW NOR HIGH 22b
1 2 3
PROG
SINGLE
4 5 6
RANDOM
7 8 9
REPEAT
STOP PLAY / I I
0
22a
– FOLDER – REV. – SKIP – F.WD
19 20
ENTER
A B
MODE
24 23 28 29
27
POWER
CD / CARD VOLUME
− +
26
MEM.
30
16
17
18
21
25