Monacor CD-114/BT Bedienungsanleitung Seite 24

5.6.4 Fast forward
Keep the corresponding SKIP button (20) pressed:
Player Remote control
NEXT F .WD
PREV REV .
5.6.5 Programming an individual
title sequence
1) Press the button PROG (16) .
appear on the display .
2) Program the first title of the title sequence:
1 . For media with several folders, use a
FOLDER button (19) to select the folder
containing the title .
2 . To select the title, press a SKIP button (20)
to skip to the title or enter the number of
the title (in the folder) using the corre-
sponding numeric button (s) (25) .
3 . After skipping to the title or immediately
after entering the title number, press the
button PROG or the button ENTER
to confirm: The memory location indica-
tion will change from
3) Proceed in the same way for all other titles .
A title sequence is limited to a maximum of
10 titles .
4) When the last title has been programmed,
press the button PLAY/ II (21): The title
sequence will be played .
the display and underneath it the number of
the current title in the title sequence .
The SKIP buttons can be used to skip to
the next or previous title of the title sequence .
5) For the title sequence, the replay modes
REPEAT ONE, REPEAT ALL and SINGLE ONE
are available .
Note: The mode RANDOM does not work for a
programmed title sequence .
The title sequence will be deleted as soon as the
player goes to stop mode . The title sequence will
also be deleted, when the player is switched to
another operating mode or to standby or when
it is switched off .
24
reverse
/
Function
fast forward
fast reverse
PROGRAM
to
P-00 P-01
will appear on
MEM
5.6.6 Hot key function
For each medium used (CD, USB storage de-
vice, SD card), up to 10 titles can be saved and
directly called up via a numeric button . To do
this, activate the hot key function .
1) When the player is in stop mode, press the
button PLAY/ II (21) to start the replay . It is
only possible to activate the hot key function
during replay or pause .
will
2) To activate the hot key function, press the
button CD / CARD MEMORY or MEM . (26) .
HOT KEY>00
3) To save a title:
1 . Use a SKIP button (20) to select the title .
For media with several folders, it may be
useful to first select the folder containing
the title with a FOLDER button (19) .
2 . Keep the numeric button (25) corre-
sponding to the desired memory location
pressed (the buttons 1 ... 0 correspond to
the memory locations 1 ... 10): Once the
title has been saved, the memory location
(28)
number will appear on the display next to
HOT KEY>
.
4) To save further titles, proceed in the same way .
5) To call up a title that has been saved, briefly
press the numeric button corresponding to
the memory location: The title will be played
and its memory location number will appear
on the display next to
ing the title, the player will go to pause .
6) To deactivate the hot key function, press the
button CD / CARD MEMORY or MEM . (26) .
The indication
The hot key function will be deactivated when
the player is switched to another operating
mode, when it is switched to stop or to standby
or when it is switched off . In these cases, the
titles that have been saved for the respective
medium will remain saved and can be called
up when the function is activated . The titles
will be deleted, however, when the medium is
replaced by a new one and the hot key function
is activated for this new medium .
will appear on the display .
.
HOT KEY>
will disappear .
HOT KEY
. After play-