Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.
PROGRAMMING & GRINDING
6.1
Select mode
Select mode is activated at delivery. The left button is programmed for one portion, with a grinding time of 7
seconds, and the right button is programmed for two portions, with a grinding time of 11.5 seconds.
Switch between the respective times using the buttons below the display,
Left button: 1 portion
Right buttons: 2 portions
The push button works as a start-pause/stop button for the dose shown on the display. The display
indicates the remaining grinding time (by counting down).
You can pause grinding by pressing the push button. The remaining time will be displayed for 5 seconds. If
the user presses the push button again within 5 seconds , the grinding is continued until finished or paused
again. Afterwards the grinder jumps back to the selected dose and is ready to grind again immediately. If
the paused grinding process is not continued within 5 seconds, the grinder jumps back to the selected dose
and is ready to grind again.
i
Only in select mode, a bar is displayed at the bottom left for single cup and at the bottom
right for double cup. This indicates that the select mode is currently active and „NOT" the
barista mode.
To change these grinding times, see 6.4.1 and 6.4.2.
6.2
Barista mode
In this mode, you can change between different 1cup & 2 cup doses quickly: Just press the push button
once for a single shot and twice for a double shot. To stop grinding press the push button three times.
For manual grinding keep the push button pressed down for as long as you would like to grind. Afterwards
the grinder is ready to grind again immediately.
Spontaneous selection of different doses:
1 push: Single shot (1 portion)
2 pushes: Double shot (2 portions)
3 pushes: stop
To change grind times, see 6.4.1 and 6.4.2.
6.3
Single dose mode
In this mode, you can grind by pressing the push button once. The grinder then grinds for a defined "single
dose" time (default 30s).
The push button is working as a start button. Pressing the push button will start the grinding process for
the defined "single dose" time while the display counts down. To stop the grinding process, push the push
button again.
To change grind times, see 6.4.3.
Translation of the original German user manual
ENGLISH
21
Werbung
