Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Place the grinder on an even, water-resistant and stable surface.
i
•
Never place the grinder on hot surfaces.
•
Make sure that the local main power supply voltage corresponds to the information
given on the type plate on the bottom of the grinder.
•
Plug the grinder into a grounded socket only and do not leave it on unattended.
•
Do not roll or bend the power cord.
•
Do not use an extension cord / do not use a multiple socket
4.1
Operation
How to operate your C-AUTOMATIK 54:
1.
Place the bean hopper on top. Leave abaut a centimetre of space to open the the slide lock. Then press
the bean hopper down.
2.
Fill the bean hopper with roasted coffee-/espresso beans.
3.
Open the slide lock.
4.
Plug the electrical cord into an outlet and switch on the grinder.
5.
The grinder is now operational.
i
Important
Never fill the bean hopper with ground coffee. Never place a finger or other items in the
coffee bean container, nor the spout.
Emergency Stop Operation:
The grinder may be stopped immediately by pressing the On/Off switch
4.2
Adjusting the grind size
i
Grind size adjustment should be made while the grinder is operating.
1.
Make sure that the hopper is filled with coffee beans and the slide lock is open.
2.
Turn the grinder on.
3.
Perform a trial grind by shortly activating the push button.
4.
In case the grind size is
> too coarse, turn the grind level adjuster clockwise (numbers on the scale are going down).
> to fine, turn the grind level adjuster counter-clockwise (numbers on the scale are going up).
5.
Please use only small ½ steps to adjust the grind size.
Translation of the original German user manual
Grind size becomes finer.
ENGLISH
18
Werbung
