Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Operating Instructions
Type
B
AIR1-EVH RH 1500
520
AIR1-EVH RH 2000
580
AIR1-EVH RH 3000
640
AIR1-EVH RH 5000
780
AIR1-EVH RH 6000
830
AIR1-EVH RH 8000
950
1000
AIR1-EVH RH 9500
AIR1-EVH RH 12000
1080
AIR1-EVH RH 15000
1200
CHAPTER 2
INSTALLATION AND
COMMISSIONING
m
WARNING
nmlr
m
DANGER
ATTENTION
m
DANGER
m
DANGER
m
WARNING
Electrical pre-heater AIR1-EVH
C
E
I
K
760
745
160
313
860
805
200
339
970
865
200
380
1240
1005
300
465
1360
1055
330
515
1610
1175
300
630
1710
1225
300
680
1860
1305
300
765
2110
1425
405
880
2�1 General installation instructions
m
Risk of personal injury and material damage!
Internal sheet metal parts have sharp edges and notches that can cause scratches/injuries during installation
and maintenance of the unit and/or accessories�
– The installation and maintenance of the unit may only be carried out by qualified specialist personnel.
– Suitable protective equipment must be worn.
2�1�1 Receipt
Please check delivery immediately on receipt for accuracy and damage. If damaged, please notify the carrier immedia-
tely. In case of delayed notification, any possible claim may be void.
2�1�2 Storage
When storing for a prolonged time, the following steps are to be taken to avoid damaging influences:
Protection by dry, airtight and dust-proof packaging (plastic bag with desiccant and humidity indicators). The storage
place must be waterproof, vibration-free and free of temperature variations (ambient temperature limit: min. 0 °C /max.
+40 °C). Damages due to improper transportation, storage or commissioning must be verified and are not liable for
warranty.
2�1�3 Shipping
The shipping must be carried out carefully. It is recommended to leave the unit in the original packaging until installation
to avoid possible damages and contamination.
The shipping must be carried out by trained and experienced personnel and the necessary safety precautions should
be taken to prevent overturning and slipping of the device. it should be ensured that the weight is evenly distributed
when shipping the unit.
m
Personal injury and/or material damage due to incorrect shipping!
It must be ensured that the means of transport/lifting is suitable to accommodate to the required weight and size
capacity.
– Make sure that the unit is firmly seated before lifting it.
Material damage due to excessive load!
Before off-loading the units, please ensure that the means of transport/lifting have sufficient capacity for the required
weight.
m
Risk of personal injury and material damage!
The package units may have an eccentric centre of gravity� If the package unit is incorrectly lifted, it can tip
over� Falling or tipping package units can cause serious personal injury�
When lifting, the centre of gravity of the package unit must be vertically beneath the crane hook�
2�1�4 Disassembly and re-assembly
m
Danger to life due to electric shock!
An electric shock can result in death or serious injury.
– Ensure that the unit is voltage-free and isolated from the mains power supply. Ground and short circuit the unit, shield
neighbouring live components.
– The unit must be isolated from the mains power supply before disassembly or re-assembly.
m
Risk of personal injury and material damage!
The disassembly and re-assembly of the unit are not part of routine maintenance.
– The disassembly and re-assembly of the unit may only be carried out by qualified specialist personnel.
O
P
R
S
380
265
378
338
430
295
498
338
485
320
608
438
620
375
883
438
680
400
883
438
805
465
1083
438
855
490
1228
438
930
530
1503
538
1055
590
1628
738
4
T
U
V
W
350
310
–
–
470
310
–
–
580
410
498
–
855
410
498
–
855
410
498
–
1055
410
498
361,1
1200
410
498
409,4
1475
510
598
501,1
1600
710
798
814,2
EN
X
AF
–
712
–
812
–
922
–
1192
–
1312
–
1562
–
1662
1563
1812
1688
2062
Werbung
