Werbung
Verfügbare Sprachen
Verfügbare Sprachen
⑮ Static pressure adjustment
⑯ Change auto-address
⑰ Change auto-address
⑱ Address setting of main IU
⑮ Static pressure adjustment
This is operable in case of connecting duct type IU equipped with the external
static pressure adjustment function.
Operating method is described in the installation manuals for the indoor units
with this function.
⑯⑰ Change auto-address
In case of Multi series (KX) models, the IU addresses registered with the auto-
address setting method can be changed with this function .
When an indoor unit is selected and the Change button is tapped, the display
changes to the Change auto-address screen ⑰ . When the address is changed
▲
▼
buttons and the Set button is tapped, it returns to
with
the Change auto-address screen ⑯ on which the new address is displayed.
Tap the Finish button to register the new address.
⑱ Address setting of main IU
In case of Multi Series (KX) models, it is possible to let indoor units (Sub IUs)
follow the operation mode (Heating, cooling) of the indoor unit (Main IU).
Set the address of the Main IU to the Sub IUs which shall be followed to the
Main IU by using each R/C connected to each Sub IU.
In case of the single PAC unit, or the plural indoor units connected to one R/C,
it is not available to operate.
Setting can be made from the main R/C of Sub IU only. It cannot be set from
the sub R/C of Sub IU.
— 18 —
Werbung
