Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Functions and menu items of Remote control
Names and functions of sections on R/C (Operating section)
Touch panel system, which is operated by tapping the LCD screen with a finger, is employed for any operations
other than the ① Run/Stop, ② High power and ③ Energy-saving switches.
①
switch
One push on the button starts operation and
another push stops operation. ( ★ )
②
switch
Pushing this button starts the high-power operation.
( ★ )
③
switch
Pushing this button starts the energy-saving
operation. ( ★ )
④ Operation lamp
This lamp lights in green (yellow-green) during
operation. It changes to red if any error occurs.
⑤ LCD (With backlight)
A touch on the LCD lights the backlight.
The backlight turns off automatically if there is no
operation for certain period of time.
Duration of the backlight lighting can be changed.
( ★ )
⑤ LCD display (With backlight)
③
④ Operation lamp
⑥ USB port (mini-B)
①
switch
②
switch
When the backlight is setting ON, if the screen is
tapped while the backlight is turned off, the
backlight only is turned on. (Operations of switches
① , ② and ③ are excluded.)
⑥ USB port
USB connector (mini-B) allows connecting to a
personal computer.
For operating methods, refer to the User's manual
attached to the software for personal computer
(Utility software of Eco-touch remote control RC-
EX1 series)
Request
· When connecting to a personal computer, do not connect
simultaneously with other USB devices.
Please be sure to connect to the computer directly, without
going through a hub, etc.
★ See User's manual for details.
— 9 —
switch
Werbung
