Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Driving instructions
4. DRIVING INSTRUCTIONS
4.1. Application areas
4.1.1. Designated use
The implement is equipped with two rollers used to carry
materials. Transport the material as low as possible. The
main application area is the handling of:
•
square bales
•
round bales
Lower the loader as far as possible when moving. Keep
in mind that the higher you lift the loader, the higher the
centre of gravity, resulting in increased risk of the tractor
overturning.
4.2. Before operating the implement
Check with caution that:
1. The hose connected to the cylinder's (+) side has red
marking, and the implement moves in accordance with
the open/close description.
2. There is no leakage of hydraulic oil.
3. The implement is correctly fitted and that the pins are
in the locked position. Press the tip of the implement
against the ground (1) to check that the implement is
firmly fixed (2).
4. There is no risk of collision between loader and
attachment (see illustration).
5. Lubricate the implement sufficiently 5. Lubrication and
maintenance.
See also the chapter "Connection and disconnection of the
implement" in the loader operating manual.
1
2
Fig.17 Check that the implement is secured by pressing its front
end against the ground.
Fig.18 Check carefully that there is no risk of collision between
loader and implement.
12
Werbung
Inhaltsverzeichnis
