Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.0 Assembling the product
3.1 Installing the propellers
1. Remove the screws before re-installing the
blades.
3.2 Charging the helicopter battery
1. Turn off the helicopter;
2. Connect the battery to the charging cable (Install batteries in correct polarity.)
3. Insert the charging cable into the USB port of the computer (The indicator light is off.)
4. Fully charged indicator light is red. Charging time: about 60 minutes Flight time: about 7 minutes.
2. A labeled blades fit on the A labeled motors, B
labeled blades fit on the B labeled motors. Use the
screws to tighten the blades. Refer to the image.
6
Werbung
