Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.0 Flight guide
4.1 Flight preparation and turning the helicopter on/off
Black line
Red line
1. Install interface in correct polarity.
3. Turn on the transmitter.
1
2
5. Move the throttle stick fully up and after fully
down. The helicopter indicator lights will stop
flashing and turn solid indicating successful
pairing. The helicopter is ready to fly.
2. To turn on the helicopter, move the on/off
switch at the bottom of the helicopter to the ON
status / position. The indicator light will turn on.
4. Place the helicopter on the ground. Make sure
the rear end of the helicopter faces the pilot.
HEAD TAIL Horizontal position
Method 1: the helicopter takes off slowly by Pushed
up the left joystick
8
Werbung
