Part 2 Placing The Cleaner Into The Water; Part 3 Switch On The Cleaner; Part 4 Operate The Robot; Instructions For Operation Panel - Zoef Robot RANOMI ZB23PVC Handbuch

Part 2 Placing the Cleaner into the Water

To avoid any possible scratches, hold the handle and place the cleaner into the pool
with the cleaner bottom towards the wall.

Part 3 Switch On the Cleaner

1. Plug the floating cable from the cleaner into the power supply unit.
2. Plug the electrical cable from the power supply unit into the power socket.
3. Press the ON/OFF button to activate the cleaner.
4. Press the ON/OFF button again. The cleaner will start to work now.
CAUTION:
· Do not enter the swimming pool while the cleaner is working.

Part 4 Operate the robot

1. Instructions for operation panel

2
3
5
7
4
1