Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Section 4. Operating Instructions
Part 1 Preparing the Cleaner for Use
1.
Laying out the cable
Unwind the cable so it can cover the entire pool size, straight the cable along the
pool side, and make sure there are no twists.
2.
Placing the power supply unit on proper position
Power supply unit needs to be placed in a proper position so it has the reach to
coverage the whole pool. Meanwhile it needs to be at least 3.5m away from
the edge of the swimming pool.
CAUTION:
•
Only use the original supplied power supply unit.
•
Do not immerse the power supply unit in water.
•
Do not plug the power supply unit in before placing the cleaner in
the water.
•
Unplug the power supply unit before you do any service activity.
•
Ensure the power socket is protected by a ground fault interrupter (GFI)
or an earth leakage interrupter (ELI).
6
Werbung
