Storch Crossline Originalbetriebsanleitung Seite 21

Safety instructions
1. The Line Laser CrossLine is a Class 2 laser 2 (5 mW) pursuant to CFR21.
2. Do not stare at the laser, it will damage your eyes.
3. When moving the device, please turn off the power.
4. Do not use an acute article like finger nail to push the button on the top of the unit.
5. If ever possible, please use batteries of one manufacturer and of the same type.
6. When the instrument does not be used, please take off the batteries to avoid battery electrolyte effusion.
GB
7. Do not open the batteries or throw them onto the fire: dispose of used batteries in a responsible manner.
8. Do not use or keep the line laser in damp conditions.
Device characteristics
1. Separate keys for horizontal and vertical lines. Dimmer key bright / dark.
2. Magnetic self-levelling.
3. Directing spirit-level in the base.
4. If the device angle exceeds the limit value, the laser beam will automatically start to flash and an alarm sounds.
5. The fine adjustment mechanism which can be turned by 360° allows precise alignment of the vertical laser lines.
6. When switched off, the magnetic self-levelling mechanism is automatically locked by the integrated locking device to avoid any
damage at the fine electronics during transportation.
Laser line view
4 x vertical laser
1 x horizontal laser
1 x laser lot point downwards.
(The position of the lot point lies parallel to the
intersection of the vertical laser lines at the cei-
ling.)
21