iRobot Roomba Combo i5+ Bedienungsanleitung Seite 10

Roomba Combo™ Bin
Filter
Dust Bin
Water Tank
Mopping Pad
Pad
Attachments
Important: You must register your product in the iRobot Home App
and complete a mapping run before using your Combo Bin. See the
Activate your Combo Bin card for instructions.
1
INSTALL THE MOPPING PAD
Dust Bin Door
Slide the pad down over the
Tank Cap
track. Press the pad to the plate
to attach.
Pad Plate
Pad Track
Wick Cap
Wick Cap
3
SWAP THE BINS
Remove the Dust Bin from
the robot, and install the
Combo Bin.
Important: Do not
flip the robot over
with the Combo
Bin installed
2
FILL THE BIN
Fill the Combo Bin with water.
You may also use a compatible
cleaning solution. Compatible
solutions are listed at this
answers.irobot.com/s/roomba-
combo-cleanser
Note: The product starts
wicking as soon as water
is put into the tank.
Roomba i5+ Owner's Guide
®
EN
5