Swim & Fun 1087 Bedienungsanleitung Seite 57

Verfügbare Sprachen

Using for the first time

The filter system must not be run without water, since the water cools the system. The warranty

does not cover damage caused by the filter system being run without water.

1. Before you start the filter system, ensure that the system is located beside the pool at the same

level as the bottom of the pool and that all the connections are firmly clamped.

2. Let the water flow from the pool to the filter system. Make sure that the water is naturally flow-

ing to the pump through the suction hose from the pool. The pump is not self-priming! There-

fore, both the pool hose and the pump must be completely filled with water (primed) before first

use.

TIP!

Priming: Attach a hose to the base of the skimmer and switch on the water. Now the

water runs to the pump and completely fills the pump with water. Now start the pump

and as soon as the pump starts to pull water through the system, a negative pressure

will be formed in the hoses.

If there is air in the system you can remove it by slightly opening the ventilation valve

on the lid.

There is no need to re-prime unless for some reason the hoses have been disconnected.

Operation, water care and accessories

2 x 5 hour filter cycles per day, and cleaning the pool bottom and water line, are all necessary

measures for maintaining clean pool water.

What the filter system does not eliminate is algae, bacteria and other microorganisms that cloud

and colour the water and affect the water purity and hygiene.

Specific products exist to prevent their appearance and eliminate them. With a correct dose, these

products do not cause harm or any problems to the filter system, pool or bathers, but they guaran-

tee that the pool water is perfectly disinfected.

Water care products

For specific water care products see page 2 and visit swim-fun.com for product spec-

ifications, guides, tips and useful information on how you maintain crystal clear pool

water.

NOTE!

Filterballs needs to be replaced once a year. Alternatively, you can wash them,

for example in a washing machine without the use of soap at a max temperature

of 30°.