Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E X P L A N A T I O N O F T H E T E R M I N O L O G Y ,
O P E R A T I N G S T A T E S A N D A L A R M
N O T I F I C A T I O N S
Internal temperature:
Currently measured air temperature in the refrigerator.
Reference temperature:
„Simulates" the temperature of the refrigerated products. This was recorded in accordance
with DIN 58345 in a reference body facility. This temperature is also crucial for the alarm.
Target temperature:
The target temperature is preset in accordance with DIN 58345 at 5 °C. A deviation of ±3 °C
is permitted. The deviation refers to the reference temperature. If the temperature range is
exceeded or fallen short of, the refrigerator emits a visual and acoustic alarm.
Note:
You will notice a short-term temperature increase every day which is caused by the automatic
defrost function. However, the 8 °C reference temperature is not normally exceeded.
LEDs:
In addition to the indicated errors or warnings, the LED light shows an overview of the
operating status:
Green:
Yellow:
Red:
Start-up:
The refrigerator is in the non-operating mode at the time of delivery: the display is non-active.
Inserting the mains plug deactivates the non-operating mode. The appliance incorporates a
battery which has been charged for 36 hours on first-time operation.
Menu:
You can make the following settings in the menu.
• Personalisation
• Language selection
• Warning notifications
• Time setting
• Data export
Proper refrigerator operation
Appliance had an error but is in an operational state again
(see error description in display). The error must be confirmed
by the "Alarm Quitt" button. Please check the temperature
profile /error report.
Appliance is not in an operational state and has a defect.
See error notification in display. Steps must be taken
without delay.
• Temperature display
• Set up W-LAN connection
• Alarm volume
• Software
• Service (reserved for the Customer Services department)
13
Werbung
